Fiberglass Line Pipe
STAR™ Aliphatic Amine Line Pipe (Standard Design)
Product Overview
- STAR™ Aliphatic Amine Line Pipe (Standard Design) is rated for pressure levels up to 4000 psi (27,6 MPa) and temperatures up to 200° F (93.3° C).
- This product consists of a unique resin system consisting of Aliphatic Amine Cured Epoxy.
- This system features a API 8rd Threaded Joining System. The Join Lengths are 30 Feet (9.1 m) with Nominal Random Lengths of 20 to 32 feet (6.1 m to 9.8 m).
- STAR™ Aliphatic Amine Line Pipe (Standard Design) are available in a variety of dimmest from 1½ through 8 inches (with API 8rd Thread).
- A variety of filament wound API 5B threaded fittings are available. Purchase all fittings by thread size and design pressure rating only.
Product Design
- The STAR™ Aliphatic Amine Line Pipe (Standard Design) has a design life of 20 years at full rating and is designed to operate at a temperature of 150° F (65.6° C).
- This product was designed with a nominal wall thickness. In terms of Hoop Stress, the product has average long-term hydrostatic strength (LTHS) as per ASTM D2992-B.
- This product has a non-API design.
Product Benefits
- The STAR™ Aliphatic Amine Line Pipe (Standard Design) is designed to prevent corrosion and increase the product life cycle.
- Because of the lightweight material of this product, there are reduced installation costs.
- The smoother bore of our material equates to improved flow efficiency.
- This product has a reduces paraffin and scale build-up, leading to lower maintenance costs over time.
Product Applications
- Production or Injection Lines
- Transfer or Disposal Lines
- Oil, Gas, Saltwater, C02 and H2S
Additional Resources
STAR™ Aliphatic Amine Line Pipe (API 15HR Design)
Product Overview
- STAR™ Aliphatic Amine Line Pipe (API 15HR Design) is rated for pressure levels up to 3250 psi (22.4 MPa) and temperatures up to 200° F (93.3° C).
- This product consists of a unique resin system consisting of Aliphatic Amine Cured Epoxy and reinforced with Premium Fiberglass.
- This system features a API 8rd Threaded Joining System. The Join Lengths are 30 Feet (9.1 m) with Nominal Random Lengths of 20 to 32 feet (6.1 m to 9.8 m).
- STAR™ Aliphatic Amine Line Pipe (Standard Design) are available in a variety of dimmest from 1½ through 8 inches (with API 8rd Thread).
- A variety of filament wound API 5B threaded fittings are available. API 15HR design systems require higher rated fittings, refer to the STAR High Pressure Threaded Fittings Product Data sheet. Temperature interpolation is not recommended for fittings.
Product Design
- The STAR™ Aliphatic Amine Line Pipe (Standard Design) has a design life of 20 years at full rating and to operate at a temperature of 150° F (65.6° C).
- This product was designed with a minimum wall thickness. In terms of Hoop Stress, the product has Lower Confidence Limit (LCL) of Long Term Hydrostatic Strength according to ASTM D2992-B.
- All of our STAR™ Aliphatic Amine Line Pipe (API 15HR Design) are hydro-tested at 1.5 times the series pressure rating in the factory.
Product Benefits
- This product has a reduces paraffin and scale build-up, leading to lower maintenance costs over time.
- The smoother bore of our material equates to improved flow efficiency.
- Because of the lightweight material of this product, there are reduced installation costs.
- The STAR™ Aliphatic Amine Line Pipe (Standard Design) is designed to prevent corrosion and increase the product life cycle.
Product Applications
- Production or Injection Lines
- Transfer or Disposal Lines
- Oil, Gas, Saltwater, C02 and H2S
Additional Resources
STAR™ Super Seal Line Pipe (Standard Design)
Product Overview
- STAR™ Aliphatic Amine Line Pipe (Standard Design) is rated for pressure levels up to 1250 psi (8.6 MPa) and temperatures up to 200° F (93.3° C).
- This product consists of a unique resin system consisting of Aliphatic Amine Cured Epoxy.
- This product features a Mechanical O-Ring (RSS) joining system. The join lengths are 30 Feet (9.1 m).
- STAR™ Aliphatic Amine Line Pipe (Standard Design) are available in a variety of diameters from 8 through 12 inches.
- A variety of filament wound threaded fittings are available.
Product Design
- The STAR™ Aliphatic Amine Line Pipe (Standard Design) has a design life of 20 years at full rating and is designed to operate at a temperature of 150° F (65.6° C).
- This product was designed with a nominal wall thickness. In terms of Hoop Stress, the product has average long-term hydrostatic strength (LTHS) as per ASTM D2992-B.
- All of our STAR™ Super Seal Line Pipe (Standard Design) are hydro-tested at 1.25 times the series pressure rating in the factory.
- This product has a non-API design.
Product Benefits
- This product has a reduces paraffin and scale build-up, leading to lower maintenance costs over time.
- The smoother bore of our material equates to improved flow efficiency.
- Because of the lightweight material of this product, there are reduced installation costs.
- The STAR™ Aliphatic Amine Line Pipe (Standard Design) is designed to prevent corrosion and increase the product life cycle.
Additional Resources
STAR™ High Pressure Threaded Fittings
Product Overview
NOV Fiber Glass Systems provides a broad range of high pressure fiberglass fittings and accessories to accompany our high pressure line pipe. This allows for a complete corrosion free piping system. All of these fittings are manufactured using the filament winding method of fabrication, using premium glass fibers, and quality epoxy resins. This ensures maximum pressure capabilities of these composite elements.Features for these fiberglass pipe fittings include:
- Pressure ratings are per STAR Standard Design. For API 15HR pressure ratings, refer to table below.
- There are multiple pressure classes at the design temperature of 200°F (93°C).
- There API 5B EUE or OD 8rd or 10rd threaded connections available.
- The STAR™ High Pressure Threaded Fittings are available in multiple sizes to match all of the manufactured pipe sizes and pressure classes.
- The product is mill tested to 1.25 times the Design Pressure Rating.
- These fittings consist of a unique cyclo-aliphatic amine cured epoxy resin system (unless otherwise shown).
Other Product Information
- All fittings center line to face dimensions are nominal ± ¼ inch (6.4 mm).
- All fittings are filament wound fiberglass reinforced epoxy.
- Thread sizes correspond to thread types listed in product specifications. All 1½” EUE 10rd and 2⅜” – 4½” EUE 8rd API threads conform to API 5B Table 2.6a (L4 is minimum) and all 5½” – 9⅝” OD 8rd casing threads conform to API 5B Table 2.3 (L4 is minimum). The 2”-12” Star Super Seal is a proprietary connection.
- The insertion depth or make-up length loss is listed by size under (X1 or X2) as inches (mm) per connection.
- Typical dimensions are listed one time per section and weights are approximate.
- Dimensions are US. Customary converted to metric.
- API 15HR fittings require higher rated fittings according to the following table.
- All fittings are designated by thread size based on pressure class of the pipe.
- When ordering flanged valves, the ANSI bolt pattern should match the bolt pattern of the fiberglass flange. Some high pressure (>3000 psi) line pipe use a larger thread size, requiring a different ANSl bolt pattern.
Additional Resources
Fiberglass Line Pipe Gallery
