Cold Rolled
Cold rolled steel is produced by further processing hot rolled steel through cold reduction mills (at room temperature) followed by annealing and/or temper rolling to produce steel with closer dimensional tolerances and a wider range of surface finishes.
| Quality | Relevant Specifications | Characteristics |
|---|---|---|
| Carbon – Manganese | A1008 CS | Good Formability, Mechanical Properties not specified. |
| Commercial Steel | Type A, B, C | |
| Drawing Steel | A1008 DS | Non Aging Steel, minimizes possible fluting and stretcher strains during forming. |
| Type A, B | ||
| Deep Drawing Steel | A1008 DDS | |
| Extra Deep Drawing Steel | A1008 EDDS | |
| Structural Steel | A1008 SS(various strength levels) minimum yield strength ranging from 25,000 PSI to 80,000 PSI | Specified whenever guaranteed mechanical properties are required. |
THEORETICAL WEIGHT PER SQUARE FOOT
COLD ROLLED (.135–.0149)
| Gauge | Nominal Thickness In Inches | Estimated Weight Per Square Foot |
|---|---|---|
| 7 | 0.1793 | 7.5 |
| 8 | 0.1644 | 6.875 |
| 9 | 0.1495 | 6.25 |
| 10 | 0.1344 | 5.625 |
| 11 | 0.1196 | 5 |
| 12 | 0.1046 | 4.375 |
| 13 | 0.0897 | 3.75 |
| 14 | 0.0747 | 3.125 |
| 16 | 0.0598 | 2.5 |
| 18 | 0.0478 | 2 |
| 20 | 0.0359 | 1.5 |
| 22 | 0.0299 | 1.25 |
| 24 | 0.0239 | 1 |
| 26 | 0.0179 | 0.75 |
| 28 | 0.0149 | 0.625 |
| – | – | – |
Our Products
-
- Blacksmithing
- Blocks and Sheaves
- Chain
- Chain Slings
- Clamps, Plate-Beam
- Connecting Links
- Eye bolts
- Hoists, Hand and electric
- Hooks
- Load Binders
- Rings, Forged and Welded
- Roller Bearing Swivels
- Shackles
- Sheet and Plate Clamps
- Transport Chain and Accessories
- Turnbuckles
- Wire Rope and Fittings
- Wire Rope Lifting Slings and Fittings
Find your respective product
Reference GuideProduct Reference Guide for Service Centers
11 MB application/zip
Documents Available in Other Formats
For those users with accessibility requirements, all PDFs on this website are available in Rich Text Format (RTF) upon request.
Contact Us