HOT ROLLED COIL AND SHEET STEEL
Hot rolled steel is rolled on a continuous strip mill, generally above 1600°F (870°C), to the desired thickness. The steel is supplied with either a standard “black” finish, or pickled and oiled, in slit coil or sheet form.
Quality Relevant Specifications Characteristics
Carbon – Manganese A1011 CS Suitable for simple bending and moderate forming, mechanical properties not specified.
Commercial Steel Type A, B, C
Drawing Steel A1011 DS Non Aging Steel, eliminates possible fluting and stretcher strains during forming.
Special Killed Type A, B
Structural Steel A1011 SS (various strength levels) minimum yield strength ranging from 30,000 PSI to 55,000 PSI Specified whenever guaranteed mechanical properties are required.
CSA W grades are now available in selected sheet sizes (per CSA G 40.21).
THEORETICAL WEIGHT PER SQUARE FOOT HOT ROLLED (.1793–.060)
| Gauge | Nominal Thickness In Inches | Estimated Weight Per Square Foot |
|---|---|---|
| 7 | 0.1793 | 7.5 |
| 8 | 0.1644 | 6.875 |
| 9 | 0.1495 | 6.25 |
| 10 | 0.1344 | 5.625 |
| 11 | 0.1196 | 5 |
| 12 | 0.1046 | 4.375 |
| 13 | 0.0897 | 3.75 |
| 14 | 0.0747 | 3.125 |
| 16 | 0.0598 | 2.5 |
| 18 | 0.0478 | 2 |
| 20 | 0.0359 | 1.5 |
| 22 | 0.0299 | 1.25 |
| 24 | 0.0239 | 1 |
| 26 | 0.0179 | 0.75 |
| 28 | 0.0149 | 0.625 |
| – | – | – |
For material heavier than 7 gauge (.1793) see plate section.
Our Products
Documents Available in Other Formats
For those users with accessibility requirements, all PDFs on this website are available in Rich Text Format (RTF) upon request.
Contact Us