Steel Plates Baldwin
ACCURLOY
Clean, fine-grain, alloy steel shafting produced by the electric furnace process and furnished TG & P for applications requiring high tensile strength and resistance to wear, shock and fatigue.
|
![]() |
NICHROLOY
Clean, fine-grain, alloy steel shafting produced by the electric furnace process and furnished hot-rolled for applications requiring high tensile strength and resistance to wear, shock and fatigue.
|
![]() |
V-MAX
An economical, universal bar stock designed for strength as well as easy machining.
|
![]() |
MAR-10
A vacuum-remelt grade of martensitic age-hardenable stainless steel, custom-designed for pump-shaft type applications which require higher strengths than 304 or 316/317, and greater corrosion resistance than 410/416 or 17-4PH. Mar-10 is aircraft quality, specially ground and polished, and straightened to pump shaft requirements.
|
![]() |
MANGABRAZE
An abrasion-resistant, work-hardening, proprietary chemistry alloy plate intended for use where both high hardness and toughness are desired. Field tested under the most severe conditions, Mangabraze is a proven leader in resistance to wear failure due to its rich Nickel/Manganese chemistry. Significantly reduces costs by providing an extended service life. 360-425 BHN
|
![]() |
E-Z BRAZE
A 280-340 BHN version of Mangabraze, E-Z Braze is easy to weld and easy to form. Designed for applications where ease of fabrication and resistance to shockare required.
|
![]() |
TUFFBRAZE
A high quality abrasion-resistant liner plate engineered to provide excellent resistance to a variety of severe service abrasive applications where ductility and fabrication may be required. 400-444 BHN
|
![]() |
TUFFBRAZE 500
A high hardness alloy AR plate, engineered for cut and weld applications where severe low stress (smaller particle) abrasion is the main cause of failure. 500-515 BHN
|
<![]() |
TUFFBRAZE 600
600 BHN surface on 515 BHN base alloy AR plate.
- Can replace: AR plate, Cr/W carbide overlay, thermal spray coated steels
- Sizes: ¼ to 2” thick, up to 8 x 24’
TUFFCORE
600 BHN ID hardness abrasion-resistant wear pipe, ideal for applications where heat and heavy abrasion penetrate and erode the average pipe (e.g. ash slurry lines, coal, gravel and other abrasive product conveyance systems).
|
![]() |
NICHROLOY L
A low carbon version of the Nichroloy product line, ideal for tubing applications where welding is required.
- Sizes: 1 to 18” OD, STD or EH
See Nichroloy in the Bar Section for general information. Nichroloy “L” is a low carbon version of the Nichroloy product line. Use Nichroloy “L” Hollow Bored Bar & Tubing in applications requiring welding.
OH HOLLOW BAR
An oil-hardened tool steel tubing designed to reduce time and costs in hollow bar applications.
- Sizes: 1 to 10.497” OD
HI-MANG
An 11-14% manganese steel, available in plate, rounds and flat and fabrications for shot blast parts, chain guides, Pangborn liners, Bradford breaker plates and other work-hardening steel applications.
TRED PLATE
A 400 BHN lug plate for improved wear-resistance in chutes, fan blades, loading docks, and deflection plates.
WEAR SCREENS
Heat-treated plates, perforated per your specifications for shake-outs, grating or conveyor screens.
WEAR BARS
Heat-treated flat bar; flame-cut, saw-cut or rolled for guide rails, assembly-line tracks, brake dies, blades or various wear edges.
STUD STOCK
Fully threaded bar for high-strength bolts in all grades of alloy and stainless steels.
TUFFKEY
Precision square keystock in 12’ lengths.
HI-CASE
60 Rockwell case-hardened bearing shaft stock.
STAINLESS
Custom stainless steel to your specifications, including hollow bar, high-nickel grades and custom machining services.
NICHROLOY CD
Flats, squares, hexagons and octagon for rails and tool room.
TOOL STEEL
O1, D2, H-13, A-2, S-7, etc… the right tool-steel to fit the need.
PLASTIC
Various grades and sizes of non-steel wear materials, e.g., UHMW and urethane liner plates.