Skip Ribbon Commands
Skip to main content
> Home > Products > Sheet and Coil > Sheet & Coil > Cold Rolled
Cold Rolled

Cold rolled steel is produced by further processing hot rolled steel through cold reduction mills (at room temperature) followed by annealing and/or temper rolling to produce steel with closer dimensional tolerances and a wider range of surface finishes.

Quality Relevant Specifications Characteristics
Carbon – Manganese A1008 CS Good Formability, Mechanical Properties not specified.
Commercial Steel Type A, B, C
Drawing Steel A1008 DS Non Aging Steel, minimizes possible fluting and stretcher strains during forming.
Type A, B
Deep Drawing Steel A1008 DDS
Extra Deep Drawing Steel A1008 EDDS
Structural Steel A1008 SS
(various strength levels) minimum yield strength ranging from 25,000 PSI to 80,000 PSI
Specified whenever guaranteed mechanical properties are required.

 

THEORETICAL WEIGHT PER SQUARE FOOT 
COLD ROLLED (.135–.0149)

Gauge

Nominal Thickness
 I
n
Inches

Estimated Weight Per Square Foot
7 0.1793 7.500
8 0.1644 6.875
9 0.1495 6.250
10 0.1344 5.625
11 0.1196 5.000
12 0.1046 4.375
13 0.0897 3.750
14 0.0747 3.125
16 0.0598 2.500
18 0.0478 2.000
20 0.0359 1.500
22 0.0299 1.250
24 0.0239 1.000
26 0.0179 0.750
28 0.0149 0.625

 

 

 

To find a location near you, please visit our Locations Map.
Pour trouver un lieu près de chez vous, s'il vous plaît visitez notre carte Emplacements.