Skip Ribbon Commands
Skip to main content
Products
Clean, fine-grain, alloy steel shafting produced by the electric furnace process and furnished TG & P  for applications requiring high tensile strength and resistance to wear, shock and fatigue.
  • Can replace: heat-treated 4340, 4140, 4150 and 6150
  • Sizes: Accurloy – ¼ to 9” diameter, 3 to 100 mm diameter, up to 27’ long
Clean, fine-grain, alloy steel shafting produced by the electric furnace process and furnished hot-rolled for applications requiring high tensile strength and resistance to wear, shock and fatigue.
  • Can replace: heat-treated 4340, 4140, 4150 and 6150
  • Nichroloy – ½ to 16” diameter, up to 27’ long
V-MAX
  An economical, universal bar stock designed for strength as well as easy machining.
  • Can replace: 4140 ANN (CF or polished), 1144, 1141, 1045, 1020 and 1018
  • Sizes: ¼ to 8” diameter, up to 24’ in length
MAR-10
  A vacuum-remelt grade of martensitic age-hardenable stainless steel, custom-designed for pump-shaft type applications which require higher strengths than 304 or 316/317, and greater corrosion resistance than 410/416 or 17-4PH. Mar-10 is aircraft quality, specially ground and polished, and straightened to pump shaft requirements.
  • Can replace: aircraft quality alloy and stainless, 450, 440, 416, 410, 17-4, 317, 316 and 304
  • Sizes: 5/8 to 7” diameter, up to 24’ in length
MANGABRAZE
  An abrasion-resistant, work-hardening, proprietary chemistry alloy plate intended for use where both high hardness and toughness are desired. Field tested under the most severe conditions, Mangabraze is a proven leader in resistance to wear failure due to its rich Nickel/Manganese chemistry. Significantly reduces costs by providing an extended service life. 360-425 BHN
  • Can replace: alloy tool steel grades 4140, 4340, 0-1, D-2; alloy wear plates
  • Sizes: 3/16 to 4” thick, up to 8 x 24’
E-Z BRAZE
  A 280-340 BHN version of Mangabraze, E-Z Braze is easy to weld and easy to form. Designed for applications where ease of fabrication and resistance to shock are required.
  • Can replace: alloy tool steel grades 4140, 4340, 0-1, D-2; alloy wear plates
  • Sizes: 3/16 to 6” thick, up to 8 x 24’
TUFFBRAZE
  A high quality abrasion-resistant liner plate engineered to provide excellent resistance to a variety of severe service abrasive applications where ductility and fabrication may be required. 400-444 BHN
  • Can replace: abrasion-resistant wear plate, castings
  • Sizes: ¼ to 2” thick, up to 8 x 24’
TUFFBRAZE 500
  A high hardness alloy AR plate, engineered for cut and weld applications where severe low stress (smaller particle) abrasion is the main cause of failure. 500-515 BHN
  • Can replace: AR plate, Cr-Fe carburizing or nitriding steels, carbide overlay
  • Sizes: ¼ to 2” thick, up to 8 x 24’
TUFFBRAZE 600
    600 BHN surface on 515 BHN base alloy AR plate.
  • Can replace: AR plate, Cr/W carbide overlay, thermal spray coated steels
  • Sizes: ¼ to 2” thick, up to 8 x 24’
TUFFCORE
  600 BHN ID hardness abrasion-resistant wear pipe, ideal for applications where heat and heavy abrasion penetrate and erode the average pipe (e.g. ash slurry lines, coal, gravel and other abrasive product conveyance systems).
  • Sizes: 2.5 to 24” OD, STD or EH, up to 20’ in lengtn
NICHROLOY L
    A low carbon version of the Nichroloy product line, ideal for tubing applications where welding is required.
  • Sizes: 1 to 18” OD, STD or EH
See Nichroloy in the Bar Section for general information. Nichroloy "L" is a low carbon version of the Nichroloy product line. Use Nichroloy "L" Hollow Bored Bar & Tubing in applications requiring welding.

 

OH HOLLOW BAR
    An oil-hardened tool steel tubing designed to reduce time and costs in hollow bar applications.
  • Sizes: 1 to 10.497” OD
HI-MANG
    An 11-14% manganese steel, available in plate, rounds and flat and fabrications for shot blast parts, chain guides, Pangborn liners, Bradford breaker plates and other work-hardening steel applications.
 
TRED PLATE
    A 400 BHN lug plate for improved wear-resistance in chutes, fan blades, loading docks, and deflection plates.
 
WEAR SCREENS
    Heat-treated plates, perforated per your specifications for shake-outs, grating or conveyor screens.
 
WEAR BARS
    Heat-treated flat bar; flame-cut, saw-cut or rolled for guide rails, assembly-line tracks, brake dies, blades or various wear edges.
 
STUD STOCK
    Fully threaded bar for high-strength bolts in all grades of alloy and stainless steels.
 
TUFFKEY
    Precision square keystock in 12’ lengths.
 
HI-CASE
    60 Rockwell case-hardened bearing shaft stock.
 
STAINLESS
    Custom stainless steel to your specifications, including hollow bar, high-nickel grades and custom machining services.
 
NICHROLOY CD
    Flats, squares, hexagons and octagon for rails and tool room.
 
TOOL STEEL
    O1, D2, H-13, A-2, S-7, etc... the right tool-steel to fit the need.
 
PLASTIC
    Various grades and sizes of non-steel wear materials, e.g., UHMW and urethane liner plates.
This is the English text. If you see this the code works, hurray!